AEOS

The AEOS is a low cost solution straight vac unit. Its larger tank capacity is made possible with the side mounted vacuum pump.

  • 4 200 gallons (US) debris tank capacity
  • 1 600 CFM – 27’’ HG vacuum pump driven by belt and pulley from transmission PTO
  • Tip-to-Dump or pressure unloading
  • DOT tank 407/412 available in option
  • Full Multiplex electronic control with 8’’ color display

Technical specifications

Get the best equipment for your vacuum truck

AEOS avec numéros

Two (2) 24″ x 48″ Aluminum Tool Box.

1

23 ton Hydraulic Hoist.

2

Secondary shut off – Moisture trap.

3

6″ piping.

4

Primary shut off – 8’’ S/S floating ball & 12″ man hole.

5

6″ isolation valve.

6

4 200 Gallons (US) (21cy) – 1/4’’ carbon steel debris tank.

7

Safety grab handrail.

8

20″ man hole.

9

5″ Overturn protection (TC 407/412).

10

4″ Pressure relief valve (Girard S/S).

11

6″ check port (Cam lock).

12

Full opening rear door.

13

Flashing arrow / Beacon & working lights.

14

Six (6) wheel locking clamps & door safety brace.

15

Liquid level indicator – 8’’ float ball.

16

6″ Betts suction valve – Air operated – Heat jacket.

17

6″ Betts discharge valve – Air operated
– Heat jacket.

18

Rear bumper (TC 407/412).

19

Two (2) rear dump greasable pivots.

20

Stainless Steel liner inside tank – 60″ dia.

21

Grip strut sidewalk.

22

Anti-slip ladder.

23

Hydraulic vibrator.

24

Two (2) Aluminum Hose tray.

25

TC 407/412 chassis locking device.

26

Final Filtration Cartridge.

27

4-way valve (pressure/vacuum).

28

Tri-lobe 1600 CFM / 27″ HG blower.
Bolt&Go w/ exhaust and manifold.
PTO belt and pulley drive.

29

Two (2) PTO for accessories & blower.

30
AEOS sans numeros
  1. Two (2) 24″ x 48″ Aluminum Tool Box;
  2. 23 ton Hydraulic Hoist;
  3. Secondary shut off – Moisture trap;
  4. 6″ piping;
  5. Primary shut off – 8’’ S/S floating ball & 12″ man hole;
  6. 6″ isolation valve;
  7. 4 200 Gallons (US) (21cy) – 1/4’’ carbon steel debris tank
  8. Safety grab handrail;
  9. 20″ man hole;
  10. 5″ Overturn protection (TC 407/412);
 
  1. 4″ Pressure relief valve (Girard S/S);
  2. 6″ check port (Cam lock);
  3. Full opening rear door;
  4. Flashing arrow / Beacon & working lights;
  5. Six (6) wheel locking clamps & door safety brace;
  6. Liquid level indicator – 8’’ float ball;
  7. 6″ Betts suction valve – Air operated -Heat jacket;
  8. 6″ Betts discharge valve – Air operated
    – Heat jacket;
  9. Rear bumper (TC 407/412);
  10. Two (2) rear dump greasable pivots;
 
  1. Stainless Steel liner inside tank – 60″ dia.;
  2. Grip strut sidewalk;
  3. Anti-slip ladder;
  4. Hydraulic vibrator;
  5. Two (2) Aluminum Hose tray;
  6. TC 407/412 chassis locking device;
  7. Final Filtration Cartridge;
  8. 4-way valve (pressure/vacuum);
  9. Tri-lobe 1600 CFM / 27″ HG blower
    Bolt&Go w/ exhaust and manifold
    PTO belt and pulley drive;
  10. Two (2) PTO for accessories & blower

Our other wet/dry vacuum truck standard series

ENYO

ENYO

The ENYO is our wet or dry vacuum unit built with durability and toughness in mind. No other unit will be more efficient at moving large quantity of materials.

  • 3 600 gallons (US) debris capacity
  • DOT tank 407/412 available in option
  • 3 800 or 6 400 CFM – 27’’ HG vacuum pump driven by inline transfer case
  • 30 bags baghouse with automatic air pulse cleaning system
  • Wet or Dry mode and isolation valves, all electric over air controlled
Explore this serie