Enyo

Be prepared to face any job with our ENYO unit!

The ENYO is our wet or dry vacuum unit built with durability and toughness in mind. No other unit will be more efficient at moving large quantity of materials.

  • 3 600 gallons (US) debris capacity
  • DOT tank 407/412 available in option
  • 3 800 or 6 400 CFM – 27’’ HG vacuum pump driven by inline transfer case
  • 30 bags baghouse with automatic air pulse cleaning system
  • Wet or Dry mode and isolation valves, all electric over air controlled

Discover the Enyo from every angle!

Watch this video to discover our Enyo wet/dry vacuum equipment.

 

Technical specifications

Get the best equipment for your vacuum truck

Tri-lobe Blower, 6400 CFM, 27″ HG.

1

Check valve.

2

Two (2) 26″ Silencer with Drain Plug.

3

Two (2) Multi-bags filtration system (30 bags x 2).

4

Two (2) Carbon steel cyclone (24×56).

5

6″ Vacuum breaker.

6

20 Ton Hydraulic hoist.

7

Primary shut-off valve – 14″ S/S floating ball.

8

Isolation valve (DOT).

9

3 500 Gallons (US) (17cy) carbon steel debris tank.

10

Hydraulic telescopic boom.

11

20″ Manhole.

12

Overturn protection bar (DOT).

13

«GIRARD» valve.

14

Full opening rear door.

15

Signal light (Arrow/Flashing).

16

Six (6) wheel clamps.

17

Suction Betts valve.

18

Decant Betts valve.

19

Discharge Betts valve.

20

Heavy duty bumper (DOT).

21

Two (2) hose trays.

22

Ladder.

23

Catwalk with handrail.

24

Mechanical level indicator (passenger side).

25

Cyclone debris box.

26

Load sense hydraulic system.

27

OMSI transfer case.

28

250 CFM auxiliary pump (vacuum pressure).

28

Final filtration cartridge (10 microns).

29

250 CFM auxiliary pump (vacuum pressure).

30

Final filtration cartridge (10 microns).

31
Enyo sans numeros
ENYO
  1. Tri-lobe Blower, 6400 CFM, 27″ HG;
  2. Check valve;
  3. Two (2) 26″ Silencer with Drain Plug;
  4. Two (2) Multi-bags filtration system (30 bags x 2);
  5. Two (2) Carbon steel cyclone (24×56)
  6. 6″ Vacuum breaker;
  7. 20 Ton Hydraulic hoist;
  8. Primary shut-off valve – 14″ S/S floating ball;
  9. Isolation valve (DOT);
  10. 3 500 Gallons (US) (17cy) carbon steel debris tank;
  11. Hydraulic telescopic boom;
 
  1. 20″ Manhole;
  2. Overturn protection bar (DOT);
  3. «GIRARD» valve;
  4. Full opening rear door;
  5. Signal light (Arrow/Flashing);
  6. Six (6) wheel clamps;
  7. Suction Betts valve;
  8. Decant Betts valve;
  9. Discharge Betts valve;
  10. Heavy duty bumper (DOT);
 
  1. Two (2) hose trays;
  2. Ladder;
  3. Catwalk with handrail;
  4. Mechanical level indicator (passenger side);
  5. Cyclone debris box;
  6. Load sense hydraulic system;
  7. OMSI transfer case;
  8. Bag house debris box;
  9. 250 CFM auxiliary pump (vacuum pressure);
  10. Final filtration cartridge (10 microns).

Go beyond your goal with a customized vacuum truck

All of Supervac equipments are custom made to meet the specific needs of each customer.

Get a quote for ENYO Build your custom truck

Our other wet/dry vacuum truck
standard series

AEOS

AEOS

The AEOS is a low cost solution straight vac unit. Its larger tank capacity is made possible with the side mounted vacuum pump.

  • 4 200 gallons (US) debris tank capacity
  • 1 600 CFM – 27’’ HG vacuum pump driven by belt and pulley from transmission PTO
  • Tip-to-Dump or pressure unloading
  • DOT tank 407/412 available in option
  • Full Multiplex electronic control with 8’’ color display
Explore this serie